How to Fix a Dead Kia Picanto Key Fob
The Kia Picanto is a city car that can zip through traffic gaps and width limitations as if they weren't there. Despite its shabby appearance it's packed with lots of tech.
There are many reasons that the key fob on your Picanto Kia may not work. The most frequent reason is the battery is dead.
Dead Coin Battery
A battery that is dead is the most frequent reason of a Kia Picanto's key fob not working. Usually the key fob will show warning signs prior to dying or loses range or erratic behavior. It is recommended to replace your battery in the event that you observe any of these symptoms before the battery is completely dead. Use a battery that has the same voltage, size and specifications as the original.
If the key fob is still not working, you may require it to a dealer. This is the only way to ensure the replacement will be programmed correctly and compatible with your vehicle. If you attempt to reprogram the key fob incorrectly, the internal chip can be damaged and stop working.
A receiver module that has developed a fault is another possibility. This could be because of a chip that has been damaged, or wear and wear and tear. The signs of this issue may be difficult to spot, but it is important to find out the cause immediately. If you're unable unlock your key fob, lock or unlock the doors, or even the spare key isn't working and you are unable to lock or unlock the doors, call a dealership or a service center to get help. They'll be able to pinpoint the issue and fix it for you.
Faulty Chip
The key fob has the chip that transmits signals to a computer inside the car. If the chip is damaged it will not be sent correctly and the immobilizer will be activated. This could be due to several reasons. One reason could be a battery that is not fully charged in the key fob. Another issue is water damage. If the fob becomes wet, it is very likely that it will stop working.
A malfunctioning chip could be the cause of why a Picanto fob isn't turning on the engine. If you've replaced the battery, reprogrammed the fob and it still doesn’t work the circuit board might be damaged. If this is the case, you will have to replace it.
Press the button on the back of the key to open the fob. After this, you can remove the mechanical key. Then, follow the video below to replace the key fob's battery. Make sure you use a battery that has the same dimensions and voltage. The Fob might be damaged if used with the wrong type battery. After replacing the battery you should test it by pressing on the lock button. If it is working, you've got a great Fob.
Faulty Receiver Module
The key fob you have is subjected to a lot of abuse and isn't completely indestructible. In kia duplicate key , its contacts with batteries and buttons may be damaged and stop functioning properly. Luckily, it's pretty easy to repair this yourself with some simple tools.
The fob needs to send a message to the receiver inside your car in order for it to work. If the module is not functioning properly your fob won't be able to open or start your car. Resetting the fob is the first step you should try.
This is done by disconnecting and letting the 12 volts battery drain completely. Then, connect the positive and negative cables in reverse order.
If the battery is in good working order and the fob does not have any water damage, the issue could be related to the signal. It could be due to various factors, including interference from nearby transmitters and objects that operate on the same frequency band as the Receiver of Picanto.
Key fobs are made with rubber seals that prevent the chip inside from becoming wet. However, if they are submerged for a long period of time, the chips can be destroyed. This is why it's important to keep your key fob free from water and only make use of a key fob that has a waterproof design.
Poor programming
A Kia Picanto key fob is a convenient way to unlock and start your car. It can also be used to control the features of your vehicle. It is essential to know how to use your key fob, especially if you are driving in a hazardous environment or have a limited mobility. There are a lot of Kia Picanto key fob tricks to help you out with this!
If your key fob has stopped functioning out of the blue It could be because of an issue with its internal chip. This isn't a frequent occurrence, but it is possible. It is best to consult a Kia dealer to pinpoint the cause of the issue.
You could also try to reset the Picanto keyfob. It's a simple process and can be completed at home. The first step is to take the key fob from the ignition switch. Then connect the diagnostic tool to the OBDII port that is located beneath the dash. Then, turn on the engine. The diagnostic tool will ask you for information regarding the Picanto. This includes the manufacturer model, year, and VIN.
You can also examine the battery for a dead coin battery. The metal clips on the key fob secure the battery and complete the circuit. If the retaining clips are loose it could cause disruption to the flow of electricity, resulting in a loss in functionality.